July, 2011 Press Release
Shift Cable Adjustment Tool Kit for OMC Cobra

GLM is proud to introduce our Shift Cable Adjustment Tool Kit No. 90520. This kit is designed for the OMC Cobra lower shift cable. GLM's No. 90520 is a combin- ation of No. 90500 Bellcrank Alignment Plate (OEM: 914017) + No. 90510 Shift Cable Tool (OEM: 915271). Makes cable adjustments for your OMC as easy as a seabreeze! .

May, 2011 Press Release
Yamaha Water Pump Kits (9.9 HP thru 300 HP)

GLM is proud to introduce our Yamaha Water Pump Kits for 9.9 HP thru 300 HP. GLM's Water Pump Kits are direct replacements of the OEM. We offer kits with or without Water Pump Housings. GLM's Water Pump Kits include: impellers, pump cups, wear plates, water seal dampers, dowell pins, gaskets, o-rings and hardware. Please visit www.glmmarine.com to download GLM's Yamaha Catalog for all of our Yamaha Water Pump Kits.

January, 2011 Press Release
Johnson/Evinrude Outboards - "O" Type Large Gearcases for V4 & V6 (1979-2006)

GLM No. 28880 (OEM: 5004639) V4 without Speedo comes with GLM Gear Set No. 22650 with gear ratio 12:27. GLM No. 28810 (OEM: 5005401) V6 without Speedo and GLM No. 28710 (OEM: 5004635) V6 with Speedo comes with GLM Gear Set No. 22666, the Industry's Only Heavy Duty Gear Set with a more durable gear ratio of 12:22. GLM's Johnson/Evinrude Gearcases are Sand Casted from a Superior A356T5 Aluminum Alloy. This allows for a Heavier, More Consistant Wall Thickness than the OEM. Features include: a Mercuiser style "press-in" Pinion Bearing to replace holding screw; Water Pick-up Screens that are removable without disassembly of the drive; and GLM's Improved Bearing Carrier w/ added key & groove system to lock bearing carrier in place. Upper Drive Shafts sold separately, GLM No. 22435 (OEM: 5000615) Long Drive Shaft and GLM No. 22436 (OEM: 5000624) Extra Long Drive Shaft.

September, 2010 Press Release
Merc Gimbal Bearing for Alpha One Gen II & Bravo - GLM No. 21905

GLM's Gimbal Bearing No. 21905 is designed for the Alpha One Gen II and Bravo drive units; for 1998 and up models; (OEM: 30-862540A3). GLM No. 21905 is made with low carbon steel which can operate at higher temper- atures. A larger area between the shields allows for 30% more bearing grease filling. GLM No. 21905 is our newest addition to our product line and is GLM BUILT in the USA! Please visit www.glmmarine.com for our complete line of transom assembly components.

April, 2010 Press Release
OMC V6 Conversion Kit, Single-Piece to Center Rise Manifolds - GLM No. 58995

GLM's V6 Manifold Conversion Kit No. 58995 is designed to convert OMC Single-Piece Exhaust Manifolds to the More Efficient Center Rise Manifolds on all OMC Cobra V6 Engines with GM 262 CID Blocks for 1989 only! Comes complete with all the hardware!

February, 2010 Press Release
OMC V6 Conversion Kit, Single-Piece to Center Rise Manifolds - GLM No. 58994

GLM's V6 Manifold Conversion Kit No. 58994 is designed to convert OMC Single-Piece Exhaust Manifolds to the More Efficient Center Rise Manifolds on all OMC Cobra V6 Engines with GM 262 CID Blocks from 1986 to 1990. Comes complete with all the hardware!

December, 2009 Press Release
Merc V8 Conversion Kit, Log Style to 4" Center Rise Manifolds - GLM No. 58990

GLM's V8 Manifold Conversion Kit No. 58990 is designed to convert all Log Style Exhaust Manifolds to the More Efficient Center Rise Manifolds on all Merc Stern Drive Engines with GM 305/350 CID Blocks that have 3" or 4" Y-pipe. Not for engines with high mounted power steer- ing pumps.

November, 2009 Press Release
Bearing Carrier Retainer Wrench - GLM No. 90490

GLM's Boat Tools are your "Best Choice" for Repair Readiness! GLM's Bearing Carrier Retainer Wrench is our Original Design. GLM No. 90490 installs and removes bearing carrier retainer nuts on Bravo II & Bravo III Sterndives. It's a combination of OEM: 91- 17257 and OEM: 91-805374-1

October, 2009 Press Release
GLM's Aluminum Anodes

GLM's Aluminum Anodes are Light, Strong & Long Lasting and are your "First Choice" for Cathodic Protection in Salt & Brackish Waters. Our Aluminum Anodes are made with Superior Alloys supplied by POLCOR, making them the Most Reliable Anodes on the Market!

September, 2009 Press Release
GLM's "Fine-Particle" Water/Fuel Separator Kits

Protect your Boat Engine from Harmful Effects of Ethanol Gas by using a combo of GLM's Extended Low Fuel Pick- up Mounting Brackets and 10 Micron "Fine-Particle" Fuel Filters. You can rest assured that your Boat Engine and Fuel Systems are in protective hands

August, 2009 Press Release
GLM's Plastic Inline Fuel Filters

Protect your Fuel System with GLM's Plastic Inline Fuel Filters! SEFAR Swiss made Filter Element with 1.5 sq. inch filtration. Filter Shell made of 100% Nylon. Very Good Heat Resistance, Excellent Chemical Resistance and Excellent Wear Resistance. For 1/4", 5/16" and 3/8" Hose.

July, 2009 Press Release
GLM's Merc Replacement Aluminum Anode Kits

GLM's Aluminum Anodes are Lighter & Longer Lasting than Zinc Anodes. Our Merc Replacement Aluminum Anode Kits include: No. 12672 (OEM:N/A), No. 12754 (OEM:888756Q02), No. 12722 (OEM:888756Q01), No. 12724 (OEM:888758Q01), No. 12726 (OEM: 888761Q02), and No. 12891 (OEM:888761Q02).

June, 2009 Press Release
Translucent Red Stainless Steel, Water/Fuel Separator Kit - GLM No. 24960

Through extensive research and testing, GLM's engin- eers have found the optimum location for fuel pick-up. The deeper location is low enough to be free of aerated gasoline but high enough to be free of the water in the bottom on the separator. Now you can dress up your stainless steel water/fuel separator mounting bracket kits with GLM's NEW! Translucent Red.

May, 2009 Press Release
OMC/Volvo 4" Riser w/ Heat Sensor Port - GLM No. 51330

GLM's No. 51330 is the replacement for OMC/Volvo 4" Riser (OEM No. 3863061). Our 4" riser now comes with a Port for Exhaust Temperature Sensor and a Port for Anti-Siphon Valve. GLM is the only one in the industry that manufactures an OMC/Volvo replacement with the Exhaust Temperature Sensor Port. Works for both old and new models.

April, 2009 Press Release
100% Brand New! OMC Cobra Drive Unit - GLM No. 28820

GLM's No. 28820 OMC Cobra Lower Drive Unit is Sand Casted from a Superior A356T5 Aluminum Alloy. This allows for a Heavier, More Consistant Wall Thickness than the OEM. Features include: a Mercuiser style "press- in" Pinion Bearing to replace the holding screw; Water Pick-up Screens that are removable without disassembly of the drive; GLM's Improved Bearing Carrier with added key and groove system to lock bearing carrier in place; and it has the Industry's Only Heavy Duty Gear Set with a more durable gear ratio of 12:22.

February, 2009 Press Release
Bellow Expander Tool - GLM No. 90360

Install Exhaust Bellows on MC-1 / R / MR / Alpha One / Alpha One Gen II, Bravo and Blackhawk drive units. GLM's original design features a scissor type handle with vinyl grips. Stays open with screw lock. Now install bellows easily with GLM's Bellow Expander Tool No. 90360

January, 2009 Press Release
Heavy Duty Gear Set - GLM No. 22666